Category: Oversliders Original Products
-
The XXX Weight Shift is finally here!
We have finally released the final version of the XXX-D VIP weight shift tray support frame. After our driver pick contest, we chose Erick Gonzalez from NJ to be one of the first testers along with Jack Leach who provided us critical info in the design of this part. But rather than tell you how…
-
MS-01D IHB System Preview
New product release coming soon! The Oversliders Drift Works IHB System. Say goodbye to these annoying pillow balls on your MS, FS, and XXX without having to change your complete chassis! What does IHB stands for? IHB means \”Idependent Hinge Block\”. It is a simple efficient system we have created to replace the pillow ball…
-
MS-01D VIP Weight Shift Follow up
More progress when it comes to tuning with our MS-01D Pro/VIP conversion kit. We finally managed to tame it down to be able to have a similar pace with FXXs. If you have driven around FXXs, you know how much angle and slow speed can make tandeming with these difficult. Well after a few trip…
-
R31-16FM Weight Shift Tray
So I\’ve been working on a weight shift setup for the Eagle Racing (or any other brand out there) R31-16FM chassis. Here is what the support frame rendering look like. It might be a bit out of proportion on the render but the prototype will be printed this weekend I believe. Thanks to Mandy from…
-
MS-01D RWD Steering conversion is a go!
After extensive testing, the MS-01D finally gets a steering worthy for RWD. The slide rack system drops right in the original placement of the front carbon deck. To install this conversion, you need to remove your diff/spool/one-way completely. Once removed, install your low profile servo inside the frame with the included hardware. Some servos might…
-
Lucho\’s TCFD revamped with Weight Shift Tray
I had the pleasure to have Luis from Drift Unit let me borrow his TCFD to do a bit of work with it. His chassis was already RWD but needed a bit of cleaning and could have used some improvement. I designed a tray support frame for it to shift the weight up and increase…
-
Yokomo DP Rear Battery Tray
Here is our rear battery tray for the Yokomo DP chassis. This product is a plug and play item which does not require any modification to your chassis. Installation is done by removing the original rear bumper. Once removed, slide the tray in and put the original screws (Countersunk M3x16 preferred) back in and done!…